Slitting lines are a key piece of the manufacturing process in many industries. A slitting line processes coiled metals. The line can process the coils into smaller widths or mults. These coils or mults are then resold or used for further productions. Three main parts make up the slitter, consisting of an uncoiler, a slitter, and a recoiler. Slitting lines can typically handle master coils up to 84 inches wide and up to 80,000 pounds. The width and thickness of the resulting coiled metal after the slitting line process depends entirely on where it will be used next.
Some of the most common products that come from slitting lines are industrial pipes and tubes. Slit steel coils can be used to manufacture pipes of various sizes and lengths, including pipes similar to the ones running the sewer lines in your neighborhood.
It’s no secret vehicles take several of parts to manufacture. Many of those parts may be created from metal coils made by slitting lines. What parts can be made with those coils depends on the width and thickness of the coil, plus the metals used to create it. Automotive frames can be created from the coils, as well as the seat frames for vehicles. Steel coils are commonly used to create parts for vehicles. Parts can even be created from high strength steel coils to help lighten the total weight of the finished vehicle.
Another common product that come from slitting lines are thin rolls of the coiled metal that can be used for welding. These coils are perfect for continuous welds, since they tend to have quite a bit of yardage on them. The coils are also convenient for welding purposes since they are easy to transport.
While it’s not a common product that comes from slitting lines, the resulting coils from the lines can be used for large community art projects & sculptures. They can be used for mixed media projects, metal stamping, and even unique hanging pieces.
Cars and trucks aren’t the only vehicles with parts created from the coils made by slitting lines. Agricultural equipment such as tractors, harvesters, and even combines all have parts created by the products manufactured by slitting lines.
Components for railcars and other railroad equipment are more products that come from slitting lines.
Slitting lines take a master coil of metal and turn it into smaller coils of metal. Those coils are used in a variety of other productions. The width of the finished coil will vary depending on its intended use. There are also several metals or combinations of metals that can be used to create the coils. They can be used to create pipes and tubing. Smaller coils can even be used for welding purposes. An uncommon use for the coils created by the slitting line is art. Artists can create sculptures or stamp the thin metal. While there are a few products that come from slitting lines listed above, there are many more. Some of these products that come from slitting lines include guardrails, doors, water heaters, and shelving units. If you are in the market for a used slitting line, be sure to check out our product inventory!