96´´ BLISS REVERSING HOT MILL (USED)
Inventory #: VX-17426

Specifications

General Specifications:
Manufacturer: E. W. Bliss
Year Manufactured: 1958
Roll Size: 30"/36" x 55" x 96"
Width Maximum: 96"
Speed Maximum: 660 FPM
Broadside Maximum: 96"
Weight Maximum: 35,000 Lbs.
Ingot Size Maximum: 22" x 75" x 240"

Line Includes:
Mill Drive Motor:
- 5000 HP, 0/35/70 RPM @ 600V,
- 0/40.8/81.6 RPM @ 700V,
- DC Motor thru Pinion Stand and Spindles,
- Develops Maximum Torque @ 225% Overload
- 250% Overload - Momentary
- 275% Overload -Instantaneous (Work Rolls Driven)
96" Reversing Hot Mill Coolant System:
- Oil Type: Soluble Oil and Water (Far Best CH207B)
- Coolant Sump Pumps: (2) Ingersoll 1400 gpm @ 20 psi
- Coolant Supply Pumps: (2) Ingersoll 1500 gpm @ 110 psi
- Storage Tank: (2) 20,000 gallons
- Coolant Control System: Valvtrol
Hot Mill Vertical Edger:
- Rolls: 42" Diameter x 24" Face
- Strip Speed Maximum: 660 FPM
- Width Opening: 22" Minimum, 96" Maximum
- Edger Roll Speed: 30/60 RPM
- Edger Drive Motor:
(1) 1500 HP, 250/500 RPM, DC Motor
With Variable Voltage Control
Develops Maximum Torque @ 225% Overload
250% Overload - Momentary
275% Overload - Instantaneous
Operating Table & Guides:
- Opening Side Guides: 24" Minimum, 130" Maximum
- Table Roll Drives: Each Half Roll Individual 2.6 HP, 200 RPM Output
- 230V Permanent Magnet DC Motors
Hot Mill Run Out Tables:
- Roll Length: 96"
- Sheet Width: 24" Minimum, 90" Maximum
- Table Speed: Either Automatic with Mill or Manually Selected by Pulpit Operator
- Tables A, Band E1: 5.2 HP, 215 RPM, 230V, PMDD Motors
- Tables E2, F1, F2, F3: 4 HP, 200 RPM, 230V, DC Motors
- Tables G and H: 2.6 HP, 200 RPM, 230V, PMDD Motors
2" x 96" Hot Mill Shear:
- Manufacturer: Stamco
- Year Manufactured: 1958
- Type: Up-Cut Shear
- Speed Maximum: 18 Strokes Per Minute
- Opening Maximum: 12"
- Crop Size Maximum: 12"
- Shear Drive: 2" Thick x 90" Wide or 3" Thick x 65" Wide
(Based on 100,000 psi Shear Strength @ 600 F)
- Auxiliary Equipment:
Scrap Chute
Logan Scrap Conveyor
1" x 96" Hot Mill Plate Shear:
- Manufacturer: Stamco
- Year Manufactured: 1958
- Type: Up-Down Cut Shear
- Cut Maximum: 1" Thick x 90" Wide (Hot Metal)
- Shear Drive: 50 HP, 900 RPM, 440V, AC Motor and Control
- Auxiliary Equipment:
Scrap Chute
Scrap Conveyor





Get A Price Quote And Answers To Your Questions

To receive a price quote and to get answers to any questions that you have on this equipment fill out this form.