1-1/2´´ (38.1 mm) x .070´´ (1.77 mm) BRITISH ARM Tube Mill Line (USED)
Inventory #: VX-17476

Specifications

MANUFACTURER: BRITISH ARM
YEAR: 1988

SPECIFICATIONS:
Maximum Tube Diameter: 1-1/2" (38.1 mm)
Minimum Tube Diameter: 1/2" (12.7 mm)
Maximum Wall Thickness: .070" (1.77 mm)
Minimum Wall Thickness: .027" (.685 mm)
Maximum D/T Ratio : 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI
Maximum Mill Speed: 450 FPM (138 MPM) Max. Gear In Speed, No Load
Roll Space (Width) Forming: 6"
Roll Space (Width) Fin & Sizing: 3"
Driven Spindle Diameter: 1-1/2" (38.1 mm)
Line Direction: Right to Left

ENTRY EQUIPMENT:
(1) Double 4,000 Lb. Uncoiler with Air Brakes
(1) GUILD Shear Welder

FORMING MILL:
(1) Entry Guide Unit
(3) Driven Breakdown Stands
(4) Idle Side Roll Units
(3) Driven Fin Stands
(2) Idle Side Roll Units

WELDING SECTION: (Welder not included in quote)
(1) Seam Guide Unit
(1) Weld Pressure Unit, 3-Roll
(1) Double OD Scarfing Unit
(1) Tube Guide

COOLANT SECTION:
No Coolant Zone

SIZING MILL:
(4) Driven Sizing Stands
(4) Idle Side Roll Units
(1) Rotary Squaring Turkshead Unit

CUT-OFF:
(1) BETARAM Model E24-1.5" x .100" with TALLEYRAND Digital Length Control
(1) Runout Table
(1) Encoder

ELECTRICAL:
(1) Solid State DC Drive System, 45 HP x 2 Motor (40KW)

TOOLING TO PRODUCE THE FOLLOWING SIZES OF TUBE:
ROUNDS - INCHES (mm):
0.625" (15.8 mm) / 0.629" (16.0 mm) / 0.639" (16.3 mm)
0.677" (17.2 mm) / 0.708" (18.0 mm) / 0.716" (18.2 mm)
0.724" (18.4 mm) / 0.750" (19.0 mm) / 0.781" (19.9 mm)
0.787" (20.0 mm) / 0.799" (20.3 mm) / 0.838" (21.3 mm)
0.866" (22.0 mm) / 0.874" (22.2 mm) / 0.944" (24.0 mm)
0.974" (24.8 mm) / 0.976" (24.8 mm) / 0.984" (25.0 mm)
1.000" (25.4 mm) / 1.023" (26.0 mm) / 1.102" (28.0 mm)
1.125" (28.5 mm)

SQUARES & RECTANGLES - INCHES (mm):
0.050" (12.7 mm) / 0.625" (15.9 mm) / 0.750" (19.0 mm)
1.000" (25.4 mm) x 0.500" (12.7 mm) / 0.874" (22.2 mm)
1.181" (30.0 mm) x 0.590" (15.0 mm) / 0.732" (18.6 mm) x 0.492" (12.5 mm)
0.748" (19.0 mm) x 0.511" (13.0 mm) / 0.787" (20.0 mm) x 0.590" (15.0 mm)
1.035" (26.3 mm) x 0.590" (15.0 mm) / 1.110" (28.2 mm) x 0.519" (13.2 mm)
1.181" (30.0 mm) x 0.629" (16.0 mm) / 0.874" (22.2 mm) x 0.500" (12.7 mm)
1.181" (30.0 mm) x 0.551" (14.0 mm) / 0.921" (23.4 mm) x 0.523" (13.3 mm)
1.031" (26.2 mm) x 0.637" (16.2 mm)

NOTE: Tooling is Believed to be Correct and Accurate.
Prospective Buyers Are Advised to Check Rolls for complete sets.

CONDITION: Very Good As Taken From Service.

OVERALL DIMENSIONS: Multiple Pieces, 2 Truckloads

APPROXIMATE WEIGHT: 50,000 Lbs.




Get A Price Quote And Answers To Your Questions

To receive a price quote and to get answers to any questions that you have on this equipment fill out this form.