56´´ x .500´´ x 55,000 Lbs. Braner Slitting Line (Used)
Inventory #: VX-1596

Specifications

Specifications:
Manufacturer: Braner
Manufactured Year: 1985 (With Upgrades in 2001)
Entry Width: 7" Minimum, 56" Maximum
Gauge: .100" Minimum, .500 Maximum
Entry I.D.: 20" Minimum, 30" Maximum (with adapters)
Entry/Exit O.D.: 74" Maximum
Entry/Exit Weight Capacity: 55,000 Lbs.
Exit I.D.: 20" Minimum, 24" Maximum
Exit Width: 1" Minimum, 56" Maximum
Side Trim: 1/4" Minimum, 2" Maximum
Width Tolerance:
.100" - .250" +/- .005"
..250" - .312" +/- .010"
.312"-.500" +/- .015"
X-Ray Gauge: No
Camber: .250" in 8 Ft.
Steel Grades: 1008 / 100 KSI
Line Direction: Right to Left

Line Includes:
A. Turnstile - 4 Arm
1) 37" Wide Arms
2) 68" Floor to Top of Arms
3) Hydraulic Rotation
B. Coil Car - Above Floor
1) 50" Bed Width
2) 80" O.D. Maximum
3) Self Contained Hydraulics
C. Uncoiler (Turret Type - 2 Mandrels)
1) 54" Wide (Both Mandrels)
2) With 18"-24" Hydraulic Expansion and Pads for 28" I.D. Coils
3) Hydraulic Feed Up Air Brake
4) Attached Driven Hold Down
5) Outboard Support (New 2001)
D. Peeler/Pinch Roll/Side Guide and Shear Unit (Shifts on Slide Base)
1) 56" Wide Peeler Blade
2) 64" Wide x 7" Diameter Driven Pinch Rolls
3) Side Guides 5 Rollers Per Side
4) 60" Wide Blade on Hydraulic Downcut Shear with Scrap Bucket
E. Slitter - 56" x 11" Arbor 3 Headed Turret
1) 57" Wide x 8" Diameter Driven Pinch Rolls with 2 Roll Entry Side Guides
2) 60 HP AC Gear Motor Feed Up with Clutch
3) Shimless Tooling
F. Carry-Over System - Overhead Chain Conveys to Recoilers After Head of Coil Gripped
G. Scrap Winders (2)
1) Hydraulic Driven with Oscillation and Self Dump
2) Heavy Duty Large O.D.
H. Recoiler - Turret Type - Dual Mandrels
1) 72" Wide Drum x 20" Diameter Hydraulics
2) With Gripper (Right to Left) Pads for 24" Diameter
3) With Hydraulic Push Off and Attached Overarm with Disc Brakes
4) 250 HP Reliance Motor, 650/1950 RPM, 500V
5) 3 Speed Gearbox 24.4:1; 40.7:1; 122.1:1
I. Coil Car - Above Floor - Self Contained - 55,000 Lb. Capacity with Keeper Arms
J. Turnstile - 4 Arm Exit with Pushoff and Power Rotate
1) 54" Wide Arm
2) C-Hook Unload
3) 62" Floor to Top of Arm






Get A Price Quote And Answers To Your Questions

To receive a price quote and to get answers to any questions that you have on this equipment fill out this form.