60´´ x .125´´ x 40,000 Lbs. AKV Slitting Line (Used)
Inventory #: VX-1670

Specifications

General Specifications:
Material: Cold Rolled, Cold Rolled Lamination Silicon, Grain Oriented Silicon Steel
Width: 62" Maximum 2" Minimum
Thickness: .008" to .125"
Coil Weight Entry: 40,000 Lbs. Maximum
Coil I.D. Entry: 18" to 24"
Coil I.D. Exit: 18", 20" and 24"
Capacity:
25 Cuts in .008" thick steel
20 Cuts in .025" thick steel
7 Cuts in .125" thick steel
Slit Strip Burr: .001" Maximum
Line Direction: Left to Right
Line Speed: 0-200 to 0-600
Mode of Operation:
Drive - Single Loop
Drive - Double Loop
Shear Strength Range: 50,000 psi to 90,000 psi
Yield Strength: 50,000 psi to 90,000 psi
Entry Coil O.D. Range: 26" Minimum, 72" O.D. Maximum
Slit Coil Weight Maximum: 40,000 Lbs.
Slitter Arbor Diameter: 8.3"
Slitter Knife Diameter: 11.8"
Spacer Diameter: 9.6"
Extra Separator Arbors: (2) Extra, (1) Overarm, (1) Guide Roll
Overarm Tooling: Included
Slit Coil Weight: 40,000 Lbs. Maximum
Slit Coil I.D.: 18", 20" and 24"
Slit Coil O.D.: 72" Maximum
Slit Coil Width Range: .750" to 60"
Slit Strip Width Tolerance:
4" Strip Width +/0
12" Strip Width +/- 0.003"
18" Strip Width +/- 0.004"

Slit strip width tolerance is defined as variation in Slit Width along a Single Strand.
Actual Slit strip width is a function of slitter set up

Line Includes:
Entry Coil Car
65" Bed x 72" O.D.
Uncoiler
63" Wide
15"-18" I.D. Hydraulic Expand
Slide Base
DC Motor
Peeler/Side Guide/Breaker Roll Unit
61" Roll Width x 6" Diameter
3-Roll (1 over 2 configuration)
Crop Shear w/ Entry Pinch Rolls
65" Shear Blade, Down-Cut
Slitter Head (2)
Injector Type
63" x 8-1/2" Arbors
Scrap Winder
-Oscillating Eye, Self-Dumping
Looping Pit, Pit Carry-over table
w/ entry cascading rolls & exit separator roll
30' pit
Rotary Tension Stand
w/ entry pad tensioner,
67" Roll Width
Recoiler
65" wide mandrel x 20" ID
40,000 Lbs weight capacity
Stand Alone Hold down
Exit Coil Car
65" Bed Size x 72" OD
40,000 Lbs.




Get A Price Quote And Answers To Your Questions

To receive a price quote and to get answers to any questions that you have on this equipment fill out this form.