(734) 854-8700
info@vxmachinery.com
VX LLC
  • Inventory
  • Sell Machinery
  • Wanted Machinery
  • About
  • Contact
Categories

Categories

Edge Trimmer9

  • Misc.1

Cut to Length Lines31

Slitting Lines51

Roll Forming Equipment13

Anneal/Pickle Equipment2

Banding Equipment11

Bridle / Pinch Rolls5

Coil Cars22

Coil Handling Equipment55

Cranes4

Cutoff Saw1

Flatteners11

Furnaces4

Galvanizing Lines1

Gearboxes/Pinions3

Levelers27

Melt Shop Equipment3

Mills57

Miscellaneous205

Motor10

Paint and Coating Equipment5

Pipe Mills1

Presses7

Recoilers41

Rewind Lines1

Shears53

Slitters30

Stitchers2

Straighteners5

Uncoilers31

Welders/Weld Lines3

Wheel Loader1

  1. Inventory
  2. Edge Trimmer

VX LLC is known worldwide for acquiring and selling used edge trimming and forming machines. For over 50 years, they’ve served the manufacturing industry with various quality used edge trimmers and other metal working machinery.


Edge cutting, trimming, and forming machines are often used to cut, bend or round sharp edges of a metal cup-shaped part such as fire extinguishers, cookware, and other metal containers. They are designed to cut the edges of round pieces in production and bend them inside in one manufacturing cycle. This makes production time shorter and more economical.


Edge curling is a specialized metalworking procedure that transforms the edges of a round or flat metal sheet into hollow rings. This procedure is used to secure two parts together to safely handle air or watertight seals. Sheet metal curling tools bend the outside or inside edges of the round metal part’s rims after they have been trimmed. As a result, it gives the manufactured part a better finish and lowers the risk of usage-

related rim cutting.


Curling takes only a few seconds on top of the edge-cutting operation. All the operator needs to do is replace the edge cutting tool with the edge curling tool to apply the curling process. This can be applied to such manufacturing metals as stainless steel, black steel, aluminum, copper, tin, and zinc.


Edge curling (or closing) is commonly used in bakeware production facilities. The rims of the stainless steel, aluminum, or alloy bake molds are first trimmed by an edge trimming machine and then curled inside or outside, depending on the product requirements.


Sheet metals that go through the metal trimming and curling process are used to produce such consumer items as teapots, coffee pots, kettles, milk canisters, water heater bodies, cake molds, and other bakery related products.


Check our extensive inventory of edge trimmers, curlers, and other essential manufacturing equipment.

Filters
Used 80´´ WEAN/MCKAY SIDE TRIMMER (USED)
Details

80´´ WEAN/MCKAY SIDE TRIMMER (USED)

Used 72" x 3/8" Loopco Side Trimmer (Used)
Details

72" x 3/8" Loopco Side Trimmer (Used)

Used 54´´ X 3/8´´ WEAN SIDE TRIMMER (USED)
Details

54´´ X 3/8´´ WEAN SIDE TRIMMER (USED)

Used 36´´ GAUER EDGER (USED)
Details

36´´ GAUER EDGER (USED)

Used 10" x .250" Edging Line (Used)
Details

10" x .250" Edging Line (Used)

Used TISHKEN EDGER, 8´´ ROLL FACE SINGLE STAND MILL STAND (USED)
Details

TISHKEN EDGER, 8´´ ROLL FACE SINGLE STAND MILL STAND (USED)

Used 6´´ x 3/16´´ Tishken Edging Line (Used)
Details

6´´ x 3/16´´ Tishken Edging Line (Used)

Used 6´´ x .250´´ Yoder Edging Line (Used, Refurbished)
Details

6´´ x .187´´ Yoder Edging Line (Used, Refurbished)

Used 3" x .125" Tishken Oscillating Coil to Coil Edging Line (Used)
Details

3" x .125" Tishken Oscillating Coil to Coil Edging Line (Used)

VX LLC
  • Privacy Policy
  • FAQ's
Machinio System website by Machinio
© CopyrightVX LLC2023