(734) 854-8700
info@vxmachinery.com
VX LLC
  • Inventory
  • Sell Machinery
  • Wanted Machinery
  • About
  • FAQ's
  • Contact
Categories

Categories

Edge Trimmer9

  • Misc.1

Cut to Length Lines33

Slitting Lines56

Roll Forming Equipment13

Anneal/Pickle Equipment2

Banding Equipment10

Bridle / Pinch Rolls5

C-Hooks1

Coil Cars24

Coil Handling Equipment53

Cranes4

Cutoff Saw1

Flatteners11

Furnaces4

Galvanizing Lines1

Gearboxes/Pinions3

Levelers29

Melt Shop Equipment3

Mills57

Miscellaneous208

Motor10

Paint and Coating Equipment5

Pipe Mills1

Presses7

Recoilers44

Rewind Lines1

Shears55

Sheet Polishers1

Slitters31

Stitchers2

Straighteners5

Uncoilers33

Welders/Weld Lines3

Wheel Loader1

  1. Inventory
  2. Edge Trimmer
  3. Misc.

VX LLC is known worldwide for acquiring and selling used edge trimming and forming machines. For over 50 years, they’ve served the manufacturing industry with various quality used edge trimmers and other metal working machinery.


Edge cutting, trimming, and forming machines are often used to cut, bend or round sharp edges of a metal cup-shaped part such as fire extinguishers, cookware, and other metal containers. They are designed to cut the edges of round pieces in production and bend them inside in one manufacturing cycle. This makes production time shorter and more economical.


Edge curling is a specialized metalworking procedure that transforms the edges of a round or flat metal sheet into hollow rings. This procedure is used to secure two parts together to safely handle air or watertight seals. Sheet metal curling tools bend the outside or inside edges of the round metal part’s rims after they have been trimmed. As a result, it gives the manufactured part a better finish and lowers the risk of usage-

related rim cutting.


Curling takes only a few seconds on top of the edge-cutting operation. All the operator needs to do is replace the edge cutting tool with the edge curling tool to apply the curling process. This can be applied to such manufacturing metals as stainless steel, black steel, aluminum, copper, tin, and zinc.


Edge curling (or closing) is commonly used in bakeware production facilities. The rims of the stainless steel, aluminum, or alloy bake molds are first trimmed by an edge trimming machine and then curled inside or outside, depending on the product requirements.


Sheet metals that go through the metal trimming and curling process are used to produce such consumer items as teapots, coffee pots, kettles, milk canisters, water heater bodies, cake molds, and other bakery related products.


Check our extensive inventory of edge trimmers, curlers, and other essential manufacturing equipment.

Filters
Used 72" x 3/8" Loopco Side Trimmer (Used)
Details
72" x 3/8" Loopco Side Trimmer (Used)
VX LLC
  • Privacy Policy
  • FAQ's
Machinio System website by Machinio
© CopyrightVX LLC2023