1360 MM CEM (Compact Endless Cast and Rolling Mill) Mill for Hot Rolled Coil (Used)
1360 MM CEM (Compact Endless Cast and Rolling Mill) Mill for Hot Rolled Coil (Used)
Description
Slab Size Facilities Ladle turret 2sets, Dummy bar & car, Tundish & car are for sale. Mold, Top zone, Bender, Segment are included in this offer (Roughing mill scale breaker) Make: (Korea, 2014~2019.2) (Rouging mill) Make: Demag (Germany, 1996~2019.2) Type: 4-High tandem mill x 3 stands Bending Force Increase/Decrease WR bender ±1,500kN/chock (Roughing Mill/Pendulum shear) Make: Demag (Germany, 1996~2019.2) Slab dimension Min. slab temperature 825? Shear drive (Roughing Mill/Crank shear) Make: Danieli (Italy, 2009~2019.2) Type: Eccentric shaft type Shear capacity AC Motors Main (Roughing Mill /Pusher & piler) Make: Demag (Germany, 1996~2019.2) (Inductive heater) Make: D.K.K. (Korea+ Japan. 1996~2019.2) Material Dimension Thickness: 10~25mm(Some coils 25~30mm) Width: 850~1,350mm Consist of Power supply systems Inductive heater (Transverse Flux Induction Heater type is excluded from sale.) Insulated disk roller table(17sets × ?250 × 1,500mm) MCB(Mandrel coil box) Make: Danieli (Italy, 2009~2019.2) Material dimension Thickness: 10~25mm Width: 900~1,350mm Frunace Burner Carousel disk Mandrel Quantity: 2sets Drum Diameter: 1,350mm (Roughing Mill/ Leveller) Make: Danieli (Italia, 2009~2019.2) Revamped: (Korea,2013) (Roughing Mill /Crop Shear) Maker: Mitsubishi Hitachi (Japan, 1996~2019.2) Type: Rotary Drum Type Differential Speed Cutting Material dimension Width: Maximum 1,350mm Motor: 2 set, AC 370kW, 870rpm (350% O.L 10Sec) FSB(Finishing mill scale breaker) Make: (Korea, 2014~2019.2) Descaling Header 300 bar Descaling Header(Entry) Top & bottom 1set 400 bar Descaling Header(Delivery) Top & bottom 1set Header height adjust operation Hydraulic Cylinder x 2 per header Movable top header, Fixed bottom header FM(FINISHING MILL) Make: Mitsubishi Hitachi (Japan, 1996~2019.2) Type: F1: 4-high mill F2~F4: 4-high pair cross mill F5: 4-high work roll shift mill Rolling force: 3,500ton/stand Roll opening F1~F3 : Approx. 70 mm (with new roll) F4~F5 : Approx. 50 mm (with new roll) Bending force (Run out table) Maker: Mitsubishi Hitachi (Japan, 1996~2019.2) Run out table Type: Individual Driven Hollow Roller Table Strip cooling system Type: HDC x 6zones + Laminar bank x 10 zones (HSS) Make: IHI-Harima (Japan, 2011~2019.2) Type: Eccentricity type AC 1-90kw x 835rpm (Down Coiler) Maker: IHI-Harima (Japan, 2011~2019.2) Type: Fixed Type, Hydraulic 3-Unit Roll Coiler Material dimension Thickness: 0.8~12.7mm Width: 900~1,350mm (Caster/ Thinckness gauge) Make: IMS (Germany, 2012~2019.2) Model: TIMG-26 (Caster/Profile Meter) Make: IMS (Germany, 2004~2019.2) Model: TIMG-16 Range: 10~34mm (±0.5%) Source: Cs-137, 1850GBq Detector: Ion KG60/CS x 13 Position: After RM (Caster/Width Gauge) Make: KELK (Canada, 2009~2019.2) Model: C765 Range: 1,000~1,300mm (±0.5%) Source: Radiant type Detector: CCD camera Position: After RM (Finishing Mill/ Width Gauge) Make: KELK (Canada, 2012~2019.2) Model: C965A/B Range: 600~1,600 ? (±1.0mm) Source: Radiant heat Detector: CCD Camera x 2 (Finishing Mill/ Thickness Scanning Gauge) Make: IMS (Germany, 2004~2019.2) Model: TIMG-26 Range: 1.0~14 ? (±0.5%) Source: 160kV, 10mA Detector: Ion KG60/50 X 2 Postion: After FM (Finishing Mill/ Multi Channel Profile Gauge) Make: IMS (Germany, 2009~2019.2) Model: TIMG-22 Range: 0.6~30.0 ? (±0.5%) Source: 160kV, 10mA, 4EA Detector: Ion KG20/10 X 56 Postion: After FM (Down Coiler/ SDD) Make: Parsytec (Germany, 2003~2019.2) Model: HTS-4.2 Range: 0.6~30.0 ? (±0.5%) Source: Xenon strobe scope flash light Detector: Array CCD camera Postion: Before DC (Down Coiler/ Width Gauge) Make: KELK (Canada, 2012~2019.2) Model: C965A/B Range: 600~1,600 ? (±1.0mm) Source: LED backlight Detector: CCD Camera x 2 Postion: Before DC (No.1 Roll Grinder) Make: Toshiba (Japan, 1996~) Grinding Type Type: CNC (No.2,3 Roll Grinder) Make: Toshiba (Japan, 1996~) Grinding Type With chock: Work roll Type: CNC Cambering: Max ±5mm Roll Speed: 5~50rpm Wheel Speed: 500 ~ 1,500 rpm (Check Roll Grinder) Maker: Insung (Korea, 2005~) Grinding Type With chock: F1~5 WR Type: CNC(FANUC 18-iTB) Capacity
Specifications
Manufacturer | (Korea, 2009~2019.2) |
Model | Movable Top & bottom headers |
Condition | Used |
Stock Number | VX-17482 |
Thickness | 81~100mm |
Width | 900~1,360mm |
Casting speed | ~ 8.0m/min |
Metallugical length | 20m |
Mold length | 1,200mm |
Ladle/tundish capacity | 130ton/50ton |
No. of headers | Top & bottom 1set |
Actuator | Geard motor |
Water pressure | Maximum 220bar |
Rolling force | 2,500ton/stand |
Roll opening | Approx. 120 mm (with max. roll) |
Revamped | Danieli (Italy, 2009) |
Max. slab thickness | 116mm |
Min. transfer bar thickness | 30mm |
Max. slab width | 1,350mm |
Maximum cutting force | 15,275kN |
Cutting torque | 1,833kNm |
Maximum cutting speed | 20 m/min |
Motor power | 1,000 Kw x 2sets |
Motor base speed | 1,000 rpm |
Shear reducer | i=1/40 |
Max cutting speed range | 18 ~ 64m/min |
Eccentricity | 200mm |
Eccentric diameter | 600mm |
Cutting force | 15,000kN |
Max material thickness | 35mm |
Max material width | 1,350mm |
Min cutting temperature | 825? |
Power | 1,200kW x 2sets |
Speed | 1,500/2,500 rpm |
Maximum piling weight | 45ton |
Heater type | TFIH, LFIH Mixed |
Operating temperature | 1,100? |
Maximum temperature | 1,150? |
Capacity | 756,000 kcal/hr |
Fuel | COG for main, NG for pilot burner |
Quantity | 2sets |
Drum diameter | 5,100mm |
Drum face | 2,150mm |
Slot length | 1,650mm |
Slot opening | Approx. 80 mm |
Roll | D400mm x L1,500mmx 4sets |
Motor | 75kW x 1,500rpm |
Gear ratio | i=1/16 |
Material | SS400 Grade |
Temp | 800~1,080? |
Cutting thickness | Maximum 30mm |
Shearing force | Approx. 5000KN |
Cutting cycle | Minimum 5.0sec |
Operation | Hydraulic Cylinder operated type (W/S, D/S) |
Up down stroke | Approx. 110mm |
Increase | F1~5, 1,200kN/chock |
Decrease | F1,F5, 900kN/chock |
Roller size | D310mm x L1,500mm |
No. of rollers | 189 rollers |
Table speed | Maximum 798 mpm |
Roller cooling | External & internal cooling mixed |
Hdc flow | Approx. 6,072m3/hr |
Laminar flow | Approx. 12,620m3/hr |
Cutting strip | 0.8 ~ 3.0mm |
Cutting speed | Max. 798mpm |
Drum drive | Driven by one motor through pinion stand |
Reduction unit | i=1/2.324 |
Weight | 24ton |
Coiling speed | Max. 798mpm |
Coil outside diameter | 1,000~1,950mm |
Range | 60~120mm (±0.5%) |
Source | Cs-137, 1850GBq |
Detector | Ion KG60/CS x 19 |
Position | After caster |
Postion | After FM |
With chock | Pinch roll, work roll |
Without chock | Back up roll |
Cambering | Max ± 5mm |
Roll speed | 4 ~ 40 rpm |
Wheel speed | 500 ~ 1,500 rpm |
Swing over bed | over 1,000mm |
Distance between center | 6,000mm |
Roll dimension | D500~800mm x L6,000mm |
Roll with chock weight | Maximum 18ton |