72´´ (1830 MM) WIDE DANIELI WEAN PUSH PULL PICKLE LINE WITH MECO TEMPER MILL (USED)
72´´ (1830 MM) WIDE DANIELI WEAN PUSH PULL PICKLE LINE WITH MECO TEMPER MILL (USED)
orCall (734) 854-8700
Description
ENTRY COIL CAR (PIT/ ABOVE GROUND): PIT - (NOT AVAILABLE) NUMBER OF ENTRY REELS: 1 - STUB ARBOR TYPE ENTRY REEL MANDREL DIA (EXPANDING/SLEEVE): 22.75" - 27.50" MATERIAL: MILD STEEL-80,000 PSI YIELD ADDITIONAL COMPONENTS: SUITER/SIDE TRIMMER TENSION ROLL DEVICE VARIOUS CARRYOVER TABLES BUTECH SHEAR SCRAP REMOVAL SYSTEM STRIP DRYERS BRUSH SCRUBBING ROLLS TURRET TYPE RECOILER WRAPPER ROLL / BELT WRAPPER UNIT COIL CARS TURNSTILE
Specifications
| Year | 1993 |
| Condition | Used |
| Stock Number | VX-3089 |
| Entry coil width max | 74" |
| Manufacturer of equipment | WEAN / MEECO/ DANIELI |
| Material | STEEL |
| Entry coil width min | 24" |
| Entry coil gauge min | 0.060" |
| Entry coil gauge max | 0.500" |
| Entry coil o.d. min | 42" |
| Entry coil o.d. max | 80" |
| Entry coil i.d. min | 24" |
| Entry coil i.d. max | 32" |
| Exit coil gauge max | 0.5" @ 48" WIDE |
| Exit coil o.d. min | 42" |
| Exit coil o.d. max | 80" |
| Exit coil i.d. max | 24" |
| Line speed min | 300 FPM UP TO 0.25" GAUGE |
| Line speed max | 150 FPM ABOVE 0.25" GAUGE |
| Direction of travel (viewed from operators side) | RIGHT TO LEFT |
| Entry reel motor hp | 75 HP PER SIDE |
| Entry reel motor rpm | 500/2000 |
| Entry pinchroll dia | 14" |
| Entry pinchroll face | 75" |
| Payoff reel | STUB ARBOR TYPE, 75HP EACH SIDE |
| Entry coil processor | 2 OVER 3 FLA TIENER AND PINCH ROLL |
| Temper mill | MECO 80"WIDE X 38"DIAMETER '!WO HIGH l\11LL, 400 HP, 300/1050 RPM |
| Pickling section | 172' NEVER USED POLYPROPELENE TANKS AVAil.,ABLE |
| Rinse section | 60' NEVER USED POLYPROPELENE TANKS AVAILABLE |