3.125´´ (79.3 mm) x .134´´ (3.480 mm) SFM Tube Mill Line (New)
3.125´´ (79.3 mm) x .134´´ (3.480 mm) SFM Tube Mill Line (New)
Description
Single Point Adjustment Welding Speed: 65 - 300 FPM (20 - 90 MPM) ENTRY LINE: (1) 10,000 Lb. ERW TECH Double Uncoiler (1) ERW TECH Shear & End Welder (1) ERW TECH Horizontal Accumulator SFM FORMING MILL: (1) Entry Guide Roll (4) Driven Breakdown Stands w/Single Point Adjustment (3) Driven Fin Stands w/Single Point Adjustment (7) Idle Side Roll Units WELDING SECTION: (1) NEW 250 KW ERW TECH Solid State High Frequency Welder Input: Volts: 480 Equipped with: Heat Exchanger: Powered XY Axis for Head (1) Seam Guide (1) 3-Roll Weld Pressure (1) Double Bead Scarf Remover (1) Coolant Zone, 20' (6000 mm) Length SFM SIZING MILL: (4) Driven Sizing Stands w/Single Point Adjustment (4) Idle Side Roll Stands (2) 8-Roll Turkshead Unit CUT-OFF: (1) 3-1/2? (89 mm) ERW TECH High Speed Flying Cold Saw DRIVE SECTION: (1) Forming Motor: 75 HP / 56 KW AC Motor (1) Fin Motor: 75 HP / 56 KW AC Motor (1) Sizing Motor: 100 HP / 75 KW AC Motor MOTORS: 3 Motor AC Vector Drive System built by UCG
Specifications
| Manufacturer | SFM |
| Year | 2020 |
| Condition | New |
| Stock Number | VX-17480 |
| Line direction | Right to Left |
| Driven spindle diameter | 2-1/2" (63.5 mm) |
| Maximum tube diameter | 3.125" (79.3 mm) |
| Minimum tube diameter | 1" (25.4 mm) |
| Maximum round wall thickness | .134" (3.40 mm) |
| Maximum shapes wall thickness | .120" (3.04 mm) |
| Minimum wall thickness | .032" (.812 mm) |
| Maximum coil o.d. | 72" |
| Amps | 500 |
| Freq. hz | 60 |
| Phase | 3 |