60´´ COIL INSPECTION LINE (NEW - NEVER INSTALLED)
60´´ COIL INSPECTION LINE (NEW - NEVER INSTALLED)
orCall (734) 854-8700
Description
Coil Parameters: Design Data: Gear In Speeds: Utilities: Nominal Line Tension 14,400 Lbs. Maximum @ 1500 FPM 26,400 Lbs. Maximum @ 800 FPM
Specifications
| Manufacturer | A.D.S. Machinery |
| Year | 2005 |
| Condition | New |
| Stock Number | VX-28026 |
| Material | Cold Rolled, Low Carbon Steel |
| Material width | 24" Minimum, 60" Maximum |
| Material thickness | .012" Minimum, .110" Maximum |
| Heavy 'ends | .125" Thick Maximum |
| Coil i.d. | 24" Incoming & Recoiling |
| Coil o.d. | 36" Minimum, 72" Maximum (Incoming & Recoiling) |
| Coil weight | 60,000 Lbs. (Incoming & Recoiling) |
| Yield strength | 125,000 PSI Maximum |
| Shear strength | 80,000 PSI Maximum |
| Line speed | 810/1,500 FPM Maximum |
| Threading speed | 100 FPM Maximum |
| Hand of line | left to Right (as viewed from operator side) |
| Electrical supply | 480 VAC/3 PH/60 HZ |
| Air supply | 80 PSIG Minimum |
| Cooling water supply | 40 PSIG Minimum @ 85° F Maximum |
| City water supply | 40 PSIG Minimum |
| Strip cross section | .288"2 Minimum, 6.60"2 Maximum |
| Camber | Not to Exceed 1/4" in 10 Feet or 4" in 100 Feet |
| Edge wave, incoming | Not to Exceed 0.75" in 3 Feet |
| Center buckling, incoming | Not to Exceed 0.75" in 3 Feet |
| Coil telescopicity, incoming | Not to Exceed -.75" |
| *please note | The coil cars and shear are not included |