60" X .125" X 30,000 LBS. PRO-ECO/HERR-VOSS CUT-TO-LENGTH LINE (USED)

General Specifications:

Coil Width: 60"

Coil Weight: 30,000 Lbs.

Coil I.D.: 20" - 24"

Coil O.D.: 84"

Gauge Range:

   Stainless 303 & 304: 0.030" to 0.125" @40,000 PSI Yield

   Mild Steel: 0.024" to 0.125" @ 40,000 PSI Yield

   Aluminum: 0.030" to 0.125" @ 32,000 PSI Yield

Line Speed: 160 FPM 

Sheet Length: 20' Max.

Bundle Weight: 10,000 Lbs.

Line Direction: Right To Left 

Line Includes:

Coil Car: Pro Eco

-44,000 Lbs. Capacity

-Above Floor Design 

-Self Contained Hydraulics

-7.5 HP, 460V/3/60HZ 

-28" Lift

-Pendant Control 

-13" or 18" "V" to Floor 

-Removable Saddle for Small O.D. Coils

Uncoiler: Pro Eco

-30,000 Lbs. Capacity

-4 Leaf Pumpkin Tooth Mandrel, 61.250" Face Width

-20" - 24" Coil I.D. Range 

-Hydraulic Expansion 

-Hydraulic Slide Base 

-Attached Powered Holddown Roll, Hyd. Motor Driven; 18" Wide X 10" Dia. Rubber Covered Roll, W/Banding Slot

-10 HP GE "Kinamatic" DC Drive Motor, 1750 RPM, 500V, W/Blower, Thru Sew Eurodrive Reducer With 26.49:1 Ratio,

-SAF Solid State Drive, Model DD312-40-4, S/N: Z0111, With Handheld Programmer

-Built-In Hyd. Power Unit, 10HP, 1750 RPM

-48" From Floor To Center Of Mandrel

-150" L x 80" W x 108" High

Threading Table: Pro Eco

-Model PB.125-60-84

-Hyd. Lift & Retract

-Entry Stand: Pro Eco

-Model PRSG-7.5-60

-Driven Pinch Rolls 

-7" Dia. x 66" Face Neoprene Covered 

-Manual Adj. Edge Guides 

-Common Drive W/Leveler

 Leveler: Herr Voss Keystone

-6 HI Design 

-Model: 66/1.750-19/7 6 HI RH (NEW 1978)

-19 Work Rolls 

-1.750" Dia. x 66" Face Rolls

-7 Flights Of Back-Up Rolls

-5 Flights are Motorized 

-60 HP Baldor AC Motor, 1760 RPM, 230/460V; WER DC Clutch/Brake, 1690/130 RPM, Thru Cone Drive

Right Angle Reducer W/5:1 Ratio

Hump Table: Rowe

-Model HMP/SQ-60 (New 1978)

-Motorized Table Height Adjustment 

-Manual Adj. Side Guides

 Vinyl Applicator: 

-SIMCO Model ECS 30 Electro-Static Charging System 

 Shear: Pro Eco

-Model MCS.125-60

-60" X .125" Capacity @50,000 PSI

-240 RPM Crank Speed

-40 Cuts Per Min. Max.

-Bow Tie Top Blade 

-Manual Blade Gap Adjustment Thru Screwjacks

-Mechanical Down Cut Design 

-Air Operated Sheet Holddown Clamp

-Air Clutch And Brake

-20 HP AC MOTOR, 1150 RPM, 230/460V

Runout Conveyor And Measuring Device: Rowe

-Model CVR-PS-60-20 (New 1978)

-Capacity: 60" Wide @ 20ft. Long; 12" Wide @ 6" Long

-Positive Stop Measuring Unit 

-Motorized Belt Conveyor 

Automatic Sheet Stacker: Pro Eco

-Model: ADS.125-60-240

-Width Cap.: 12" - 66"

-24" Max. Stack Height

-20' Max. Sheet Length 

-Cam Roller Type Flipper Arms

-Air Cylinder Actuated 

-(2) AC Motors For Width Adjustment 

-AC Motor Backstop Adjustment

-Motorized Scissor Lift Table ; 10,000# Capacity

-Driven Conveyor Rolls 

-Side or End Discharge 

-(3) - 14' L Sections Driven End Discharge Conveyor,

-Last Piece Traversing

-215" L x 118.25" W x 113.5" High

Driven Conveyor Transfer Table:

Vickers Hydraulic Power Unit:

-20HP Leeson AC Motor

-1765 RPM, 203-230/460V

Main Operators Control Panel

Complete Drawings And Operator/Maintenance Manuals Included

Misc. Spare Parts

Under Power