1.    MATERIAL DATA:

MATERIAL: CR, GI, COLOR COATING COIL

TENSILE STRENGTH: MAX. 80Kg/mm2

SHEAR STRENGTH: MAX. 64Kg/mm²

YIELD POINT: MAX. 48Kg/mm²

THICKNESS: MIN. 0.3mm - MAX. 3.2mmT

COIL WIDTH: MIN. 500mm ~ MAX. 1,600mmW

COIL WEIGHT: MAX. 25,000Kg

COIL INSIDE DIAMETER: ∅508mm

   ∅610mm (RUBBER SLEEVE 150mml x 3EA)

COIL OUTSIDE DIAMETER: ∅800mm - ∅2,000mm

2.   PRODUCT SHEET DATA:

LINE SPEED: MAX.10 - 80m/min

THREADING SPEED: 20m/min

CUTTING LENGTH: NO.1 PILER - MIN. 300 mm (11.8”) - MAX 3,000 mm (118.1”)

                                   NO.2 PILER - MIN. 300 mm (11.8”) ~ MAX 5,000 mm (196.9”)

PILING WEIGHT:  NO. 1 PILER - MAX. 3,000Kg

                                NO. 2 PILER = MAX. 5,000Kg

CUTTING SYSTEM: NON-STOP RUNNING CUTTING TYPE BY ROTARY SHEAR

CONTROL SYSTEM: AC DIGITAL SERVO CONTROL TYPE

STANDARD OF THREADING: LINE CENTER

PASS LINE HEIGHT: FL (+) 1,200 mm (47.2”)

ACCURACY LENGTH: ± 0.3mm/m (.012”) (AT UNIFORM VELOCITY)

                                      ± 0.5mm/m (.020”) (AT INCREASE & DECREASE VELOCITY)

DIAGONAL: + 0.5 mm/m (.020”)

LINE THREADING DIRECTION: FROM RIGHT TO LEFT

(VIEW OF THE OPERATION SIDE)

3.    POWER SOURCE:

MAIN CONTROL POWER: AC 440V+ 10% 60 Hz+5%   3∅

OPERATION POWER: AC 220V+10% 60 Hz+5%   1∅  

HYDRAULIC PRESSURE: NORMAL: 100 Kg/cm2

                                                     MAX. 140 Kg/cm2

PNEUMATIC PRESSURE: NORMAL: 5Kg/cm²

                                             MAX.: 7Kg/cm²

^{UNDER POWER}